Stone Tower

For Our Client: Ecom Real Estate Management, Inc.

WMS has completed projects for ECOM in two of their buildings: Stone Tower, and the IKON building at 12005 Ford Road.


CWS has refinished numerous wood doors on-site for Stone Tower, using a section of the parking garage as a spray booth
Doors refinished for Stone Tower, Dallas
The damage was severe. It was caused by the removal of signage which had been attached with contractor's glue.
Splintered mahogany veneer
Here the loose veneer sections have been stabilized and the Bondo™ work has been completed.
Turning Bondo™ into Mahogany
Here the artwork has been completed, and the entire panel has been topcoated with semi-gloss lacquer. The Bondo™ plastic filler has been converted to mahogany!
Architectural Millwork Repair

Projects performed have included:

  • Touch-up and maintenance of mahogany doors
  • Refurbishing and refinishing mahogany elevator interiors
  • On-site stripping and refinishing doors
  • Refurbishing and re-covering leather elevator interiors
  • Repair and touch-up of wall paneling and doors

Saving Ripped-out Veneers: Turning Bondo™ into Mahogany

Some nasty damage to the mahogany veneer at 12005 Ford Road afforded us with an opportunity to showcase our artistic skills, as shown in the three photos at right. You can also check out our short articles for a step-by-step repair page containing photos and details about this job!

The damage was severe. It was caused by the removal of signage which had been attached with contractor's glue.

Replacement of the veneer was not an option for our client at the time.

Here the loose veneer sections have been stabilized and the Bondo™ work has been completed.

And here the artwork has been completed, and the entire panel has been topcoated with semi-gloss lacquer. The Bondo™ plastic filler has been converted to "mahogany!"